·The 5ML-10L double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering three major series of PTB55D, PTB70D, and PTB90D. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA.? The largest capacity of the product can be 10L, and its production capacity is 60 to 70% more than the single station machine.? In accordance with different type of products, die heads can be changed to achieve multi-type production. Clamping Double station+Hight-precision guide+large arm cylinder axle Extrusion system Hard gear surface reducer+Japan inverter Die system Central-incoming extrusion die with special steel Hydraulic system Japan hydraulic valve seal and proportional control Control system Japan PLC+Imported HMI+PLC automatic ..    Parameters Specifications Material PE、PP、PVC、PA… Max container capacity 2L Number of die 1、2、3、4set Output (dry Cycle) 1000×2pc/hr Machine Dimension(LxWxH) 2.7×2.3×2.5M Clamping Unit Total weight 4.5T Clamping force 38KN Platen opening stroke 130-370mm platen size 280×370mm Max mould size(W x H) 350×370/ 205×600mm Mould thickness 135-210mm Power Max drive 20.5KW Total power 26KW Fan power for screw 0.25KW Air pressure 0.6Mpa Air consumption 0.4m 3 /min Average energy consumption 15KW Extruder unit Screw diameter 55mm Screw L/D ratio 24L/D Melting capacity 50Kg/hr