·The 5ML-10L single-station automatic blow moulding machines include three series of PTB50, PTB65, and PTB70.? A wide variety of materials can be used for the machine, which are suitable for producing multi-type products in small batches. The clamping system is a high-precision single-station linear guide, extrusion system using a hard gear reducer and inverter imported from Japan.The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve.? The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts. Clamping Single station+Hight-precision guide+large arm cylinder axle Extrusion system Hard gear surface reducer+Japan inverter Die system Central-incoming extrusion die with special steel Hydraulic system Japan hydraulic valve seal and proportional control Control system Japan PLC+Imported HMI+PLC automatic ..    Parameters Specifications Material PE、PP、PVC、PA… Max container capacity 2L Number of die 1、2、3、4set Output (dry Cycle) 1500pc/hr Machine Dimension(LxWxH) 2.8×1.7×2.5M Total weight 3T Clamping Unit Clamping force 38KN Platen opening stroke 130-370mm platen size 280×370mm Max mould size(W x H) 350×370/ 205×600mm Mould thickness 135-210mm Power Max drive 16.5KW Total power 22KW Fan power for screw 0.25KW Air pressure 0.6Mpa Air consumption 0.4m 3 /min Average energy consumption 12KW Extruder unit Screw diameter 50mm Screw L/D ratio 24L/D Melting capacity 30Kg/hr